slide

15 | Tile Backer XPS System 1

BaseTM TILE BACKER XPS SYSTEM to incorporate oxygen barrier pipe to be installed to pre-routed Tilebacker panels. Giving the advantage of being able to tile directly onto the tile backer for a very low build-up on top of a concrete subfloor.

  • Specification
  • SYSTEM
  • INSTALL

BaseTM TILE BACKER XPS SYSTEM to incorporate oxygen barrier pipe to be installed to pre-routed panels. Additional screed option for tiled finish. Installation and design in accordance with pipe layout design.

DOWNLOAD System Specification PDF

Graph

SYSTEM

  • BaseTM TILE BACKER XPS specifically designed to fit directly on to sub-floor construction
  • Pre-routed panels offer quick installation with ability to be cut to exact size required in accordance with design
  • Oxygen barrier pipe fits directly into pre-routed panel offering a low system build up from only 20mm
  • Pipework is tightly encased within pre-routed panel ensuring even heat distribution across the floor area
  • Panels offer quick system response

INSTALL

  1. Pre-routed panels installed directly on to subfloor according to system design (additional insulation to be installed below panel in accordance with required thermal performance and current building regulations).
  2. Oxygen barrier pipe to be installed directly into pre-routed panels in continuous lengths from distribution manifold, spaced according to underfloor heating design.
  3. Levelling compound applied to all routed sections of boards not filled with pipework. Different floor finishes require additional leveling compound depths.
  4. Pipework to be pressure tested and remain under pressure.