slide

11 | Floating foil faced XPS System

BaseTM Floating foil faced XPS System specifically designed to fit directly on to sub-floor construction. The foil faced XPS panel ensure even heat distribution across the floor area and counter downward heat loss.

  • Specification
  • SYSTEM
  • INSTALL

BaseTM Floating foil faced XPS System to incorporate 16mm Aluminium barrier UFH pipe to be installed to pre-grooved foil faced XPS insulation panel. Installation and design in accordance with pipe layout design.

DOWNLOAD the system spec pdf

 

Graph

SYSTEM

  • BaseTM Floating foil faced XPS System specifically designed to fit directly on to sub-floor construction
  • Pre-grooved foil faced XPS insulation panels offer quick installation with ability to be cut to exact size required in accordance with design
  • Pre-grooved foil faced XPS panel offering a low system build up from 20mm
  • Pipework is tightly encased within pre-grooved foil faced XPS panels ensuring even heat distribution across the floor area. Foil faced panel to counter downward heat loss
  • Pre-grooved foil faced XPS panels offer high heat conductivity and quick system response

INSTALL

  1. Pre-grooved foil faced XPS panel installed directly on to subfloor according to system design (additional insulation may be required to meet thermal performance and current building regulations)
  2. Aluminium barrier UFH pipe to be installed directly into pre-grooved foil faced XPS panel
  3. UFH pipe to be installed in continuous lengths from distribution manifold spaced according to underfloor heating design
  4. Pre-grooved foil faced XPS panel to be routed as required allowing pipe installation in accordance with design layout
  5. Pipe work to be pressure tested and remain under pressure